This time, we will discuss about the precautions for the operation and daily maintenance of oxygen concentrators.
After receiving the oxygen concentrator, the first step is to check whether the packaging box and oxygen concentrator, including the power cord and plug, are intact, and then check whether the relevant accessories are complete. After confirming that they are correct, operate them according to the requirements of the instruction manual.
About the operation of oxygen concentrator
- Place the oxygen concentrator on a dry, ventiated, cool, clean and stable surface, avoiding direct sunlight, high temperature, humidity, dust and other environments. Keep the machine at least 30cm away from the wall or shielding, and then fix the casters of oxygen concentrator to avoid unexpected movement.
- Please read the operating methods and precautions in the product manual carefull to ensure that you have a comprehensive understanding of the use of the oxygen concentrator.
- The nasal oxygen cannula atomizer accessories are sterilized single-use products. The humidifier cup needs to be filled with purified water or distilled water and correctly connected to the oxygen concentrator according to the instructions. The function of the humidifier cup is to relieve the irritation of the dry oxygen airflow to the patient’s upper respiratory tract.
- After the oxygen concentrator is powered on, press the power switch of the machine, adjust the flow meter to the appropriate flow rate according to the doctor’s instructions, and after starting, observe whether there are bubbles in the humidification cup to verify whether the oxygen production is normal. Connect the nasal oxygen cannula to the oxygen outlet of the humidification cup, and wear the nasal oxygen cannula correctly according to the instructions in the manual to inhale oxygen.
- Keep your breathing steady while breathing oxygen
When performing daily maintenance and cleaning of the oxygen concentrator, please pay attention to the following points
- Nasal oxygen tube atomizer accessories and air inlet filters are consumables and should be replaced regularly according to the instructions. Do not share with others to avoid cross infection. Users should purchase accessories recommended or specified in the manufacturer’s instructions to prevent affecting the oxygen inhalation effect.
- The air intake filter cotton of the oxygen concentrator is reusable. It is recommended to clean it every 200 hours of use according to the instructions. If the operating environment is dusty, it is recommended to shorten the cleaning interval.
- When the oxygen concentrator is not used for a long time, the power should be turned off and dust prevention measures should be taken. When it is used subsequently, it should be powered on first and oxygen should be inhaled after 3-5 minutes.
- During the use of the oxygen concentrator, if a fault code or alarm occurs, you should check the manual and take appropriate measures. If you need to disassemble the machine for repair, you should contact the after-sales service agency.
- When using an oxygen concentrator, be careful to avoid open flames and fireworks. It is strictly forbidden to smoke while breathing oxygen.
Post time: Jun-05-2025